Sheetrock® Brand Tuff Hide™ Primer Surfacer

Sheetrock® Brand Tuff Hide™ Primer Surfacer features
Achieves a Level 5 finish faster
High build spray for a smoother, more beautiful finish
Durable coating hides minor surface defects
Excellent for critical light areas
Ideal finish for ceilings
Dries white; can be tinted to match final top coat
For professional use only
Sheetrock® Brand Tuff Hide™ Primer Surfacer application
Airless spray application only. Use professional equipment that meets or exceeds the following rating when spraying through 15m of 6mm I.D. high-pressure hose: output at least 3.8 Liter per minute; pump pressure rated at 2,700-3,000 psi; and accommodates a 0.8mm spray tip at 2,000 psi (Graco Mark V™ or equivalent). Use a 30-mesh filter located in the high-pressure manifold. Use a spray-tip orifice between 0.6 to 0.8mm. It is recommended to use a Graco heavy-duty texture spray gun or equivalent that accommodates a Graco Reverse-A-Clean (RAC) SwitchTip.
Test the spray pattern prior to application. To apply, hold spray gun perpendicular to the surface approximately 45cm away. Move the gun parallel to the surface at a steady rate. Overlap preceding application by 1/2 of the fan width for uniform paint thickness. Spray from left to right to scratch in the initial coat at approximately half of the desired thickness. Then crosshatch spray up and down as the double-up coat to the desired thickness. When painting corners, aim the gun toward the center of the corner to ensure both sides are sprayed evenly. When used in lieu of a skim coat of joint compound and paint primer coat in a Level 5 gypsum board finish, apply to a minimum Wet Film Thickness (WFT) of 0.4mm. In all applications, a wet film thickness in excess of 0.5mm is not recommended. During and after application, avoid drafts and maintain 15°C minimum product, air and surface temperatures until surface is dry.

View original product page